Create Gloomy Text Effect by Utilising the Amazing Cloud Filter in Photoshop

Step 1

Create a new document sized 1400px * 600px (in fact size doesn’t really matter much in this tutorial), fill the background with the following gradients:

Personally I like to start with a gradient background with light grey, as it helps setting the mood for the text effect later on we will be created.

On the canvas, type a letter on the centre with a big bold font (I chose this font) as shown below:

On the text layer, apply the following blending options:

Inner Shadow

Gradient Overlay

Pattern Overlay

and you will have the following effect so far:

Step 2

Duplicate the text layer three times, disable the layer effects for those duplicated layers and put them below the original text layer. Alter the font color a bit and adjust the position of the text to the left and right of the original text layer a bit.

Your result should be looking similar to the following screenshot:

Then on each duplicated layer, add a layer mask respectively and erase a portion of the text with a soft brush on the spots as shown below:

The ulimiate goal of this step is to blend the edge of the text with the surrounding, so we can get ready for the next step.

To further increase the depth of the text, we can make a copy of any one of the duplicated text layer, replace the font color with a dark one, apply the following Gaussian Blur to the text layer: (Make sure this layer is beneath the original text layer)

You will have followin effect:

Step 3

Create a new layer on top of all previous layers called “cloud” and grab the Lasso Tool and draw a selection with 25px feather around the text, as shown below:

Go to Filter > Render > Cloud and render some cloud inside it (with white as foreground colour and dark grey as background colour)

Hint: try experimenting with different feather settings for the Lasso Tool, you will see by changing the feather, the cloud with become either thinner or thicker.

Once you finish with the rendering, resize the cloud and position it as shown below:

Duplcate the cloud layer once and position it to the lower position as shown below:

Change the blending mode of both cloud layer to “Hard Light”, you will have the following effect:

Step 4

Duplicate the cloud once more and name the duplicated layer as “shadow”, put it just above the background layer, hit Ctrl + I to invert the colour and position it on the bottom of the text.

Change the blending mode of the shadow layer to “Normal” and opacity to 40%, you will have the following effect:

Duplicate the Cloud layer once and put it above all previous layer, rotate it to around 60 degree and apply the following motion blur setting to the duplicated layer:

Name this layer as “Light”.

Change the blending mode of this light layer to be “overlay”, duplicate it a few times and drag them around the text, and you will have the following effect:

Step 5

OK now we can do some fine tuning to the text by adding a Curves adjustment layer to it:

and add some colour over the text by adding another layer on top of the curves adjustment layer with the “overlay” blending mode. Here is my final effect for this tutorial:

Alternative darker version: (I adjust the brightness and contrast of the final effect, and some abstract texture to it)

Ok that’s it for this tutorial! Hopefully I gave you some ideas about the cloud filter and how you can use it for creating light, shadows and adding more depth to text effect.

Till next time, have a great day!

Photoshop Tool Basics

This is a quick summary of Photoshop’s Tools palette with a description of each tool’s functions and shortcuts. Great for those brand new to Photoshop.

I decided to start at the beginning. The very beginning. For those people who just “picked up” a copy of Photoshop and have no idea what to do with it. The keyboard shortcut is in ( ).

Rectangular Marquee Tool (M)
Use this tool to make selections on your image, in a rectangular shape. This changes the area of your image that is affected by other tools or actions to be within the defined shape. Holding the [Shift] key while dragging your selection, restricts the shape to a perfect square. Holding the [Alt] key while dragging sets the center of the rectangle to where your cursor started.

Move Tool (V)
Use this tool to, well, move things. Usually you use it to move a Layer around after it has been placed. Hold the [Shift] key to limit the movements to vertical/horizontal.

Polygon Lasso Tool (L)
Ok, this should be the Lasso Tool, but I use the Polygon Lasso a lot more often. Use this to draw selections in whatever shape you would like. To close the selection, either click on the beginning point (you’ll see the cursor change when you’re on it), or just double-click. When holding the [Ctrl] key, you’ll see the cursor change, and the next time you click, it will close your selection.

Magic Wand Tool (W)
Use this to select a color range. It will select the block of color, or transparency, based on wherever you click. In the Options Bar at the top, you can change the Tolerance to make your selections more/less precise.

Crop Tool (C)
The Crop Tool works similarly to the Rectangular Marquee tool (see above if you have no short-term memory). The difference is when you press the [Enter/Return] key, it crops your image to the size of the box. Any information that was on the outside of the box is now gone. Not permanently, you can still undo.

Slice Tool (K)
This is used mostly for building websites, or splitting up one image into smaller ones when saving out. It’s kind of an advanced tool, and since you’re in here for the basics, we’ll kind of skip over it. Kinda makes you mad I made you read all that for nothing, huh?

Healing Brush Tool (J)
This is a really useful tool. Mildly advanced. You can use this tool to repair scratches and specs and stuff like that on images. It works like the Brush tool (see below). You choose your cursor size, then holding the [Alt] key, you select a nice/clean area of your image. Let go of the [Alt] key and paint over the bad area. It basically copies the info from the first area to the second, in the form of the Brush tool. Only, at the end, it averages the information, so it blends.

Brush Tool (B)
This is one of the first tools ever. It’s what Photoshop is based off of. Well, not really, but it’s pretty basic. It paints one your image, in whatever color you have selected, and whatever size you have selected. There’s a lot of options for it, but this is basic, so you don’t get to learn them. Ha.

Clone Stamp Tool (S)
This is very similar to the Healing Brush Tool (see above). You use it the exact same way, except this tool doesn’t blend at the end. It’s a direct copy of the information from the first selected area to the second. When you learn to use both of these tools together in perfect harmony, you will be a Photoshop MASTA! Not really, it’s just less irritating.

History Brush Tool (H)
This tool works just like the Brush Tool (see above) except the information that it paints with is from the original state of your image. If you go Window>History, you can see the History Palette. The History Brush tool paints with the information from whatever History state is selected.

Eraser Tool (E)
This is the anti-Brush tool. It works like an eraser (duh) and erases whatever information wherever you click and drag it. If you’re on a Layer, it will erase the information transparent. If you are on the background layer, it erases with whatever secondary color you have selected.

Gradient Tool (G)
You can use this to make a gradiation of colors. Gradiation doesn’t appear to be a word, but it makes sense anyway. It creates a blending of your foreground color and background color when you click and drag it. Like a gradient.

Blur Tool (R)
The Blur tool is cool. It makes things blurry. Click and drag to make things blurry. The more you click and drag, the blurrier things get.

Dodge Tool (O)
This tool isn’t as crappy as the car brand. It’s actually used to lighten whatever area you use it on. As long as it is not absolute black. Absolute black won’t lighten.

Path Selection Tool (A)
You use this tool when working with paths. Since this is all about the basics, I won’t go into details. It’s related to the Pen Tool (see below) though.

Horizontal Type Tool (T)
It makes type. Or text. Or whatever you want to call it. You can click a single point, and start typing right away. Or you can click and drag to make a bounding box of where your text/type goes. There’s a lot of options for the Type Tool. Just play around, it’s fairly straight-forward.

Pen Tool (P)
I mentioned this tool above. It’s for creating paths, in which you would use the Path Selection Tool to select the path. Paths can be used in a few different ways, mostly to create clipping paths, or to create selections. You use the tool by clicking to add a point. If you click and drag, it will change the shape of your path, allowing you to bend and shape the path for accurate selections and such.

Rectangle Tool (U)
By default it draws a Shape Layer in the form of a rectangle. It fills the rectangle with whatever foreground color you have selected. It’s pretty complicated, don’t hurt yourself with this one.

Notes Tool (N)
Like post-it notes, but digital. You can use this tool to add small little note boxes to your image. These are useful if you’re very forgetful or if you’re sharing your Photoshop file with someone else. I’m pretty sure it only works with .PSD files.

Eyedropper Tool (I)
This tool works by changing your foreground color to whatever color you click on. Holding the [Alt] key will change your background color.

Hand Tool (T)
You can really make short work of your job with the Hand Tool. It’s for moving your entire image within a window. So if you’re zoomed in and your image area is larger than the window, you can use the Hand Tool to navigate around your image. Just click and drag. You can get to this tool at any time when using any other tool by pressing and holding the [Spacebar].

Zoom Tool (Z)
Pretty obvious what this tool does. It allows you to zoom into your image. Don’t be dumb, it doesn’t actually change the size of your image. Hold the [Alt] key to zoom out. Holding the [Shift] key will zoom all of the windows you have open at the same time. Double-click on the Zoom Tool in the palette to go back to 100% view.

BONUS!!
These are your color boxes. Foreground (in the front) and Background (in the back). Click on either one to bring up the color select dialog box.

E-book Cover Designs Using Photoshop

Hello Folks,
i will be teaching soon to design a great e-book cover with photoshop and more just look at this e-book cover design and post your reply on how it is.